THE FK RANGE CONTINUES TO IMPROVE.NEW FOR THIS YEAR IS THE INTRODUCTION OF OUR UNIQUE STAINLESS STEEL LID DESIGN, WHICH REDUCES COOLING TIMES SIGNIFICANTLY. As with any modifications we make, it has been regorously tested and lower temperature cooling times are reduced so aiding a faster turn round for the kiln.

The elements are on high quality ceramic rods and are wound with Kanthal A1.
The entire range, except the FK3, is designed to reach 700c in around 30-40 minutes.
The range is very economical with an average 7 hour in a FK7 firing costing around £1.00.
The handle has 2 positions. In its default position it is at 90 degrees to the chamber, and can be easily altered to be in a more down facing position to assist shorter users.
There are vent holes in the roof of the kiln to aid with faster cooling and help extract steam if any moisture is present.
On the FK6 and above the under floor steel sheet is replaced with heavy duty walk mesh to aid cooling.
Each kiln has an over temperature heat fuse with its own safety contactor to protect the kiln in the event of a disaster.
As with all our kilns the frames are powder coated and oven baked and the kilns contain no ceramic fibre.
All FK kilns now carry a 2 year guarantee on all parts including elements. This guarantee does not cover the thermal heat fuse.
Replaceable refractory brick floor.