The Gladstone E range of Pugmills has been specifically designed for the studio and classroom environment. These machines being both compact and lightweight make them easily transportable. The 49E is fitted with a hopper safety grid and thermal overload safety switch as standard.

TECHNICAL DATA G49E ECONOMY PUGMILL

4" aluminium body, 2' (5Omm) extrusion Split body to facilitate easy

cleaning, Individual Nylatron blades mounted on a hexagonal steel shaft, Geared motor reduction drive -- single or three phase

Safety grid and overload starter, Output 190-200 Kg / 400-450 lbs per hour approx, Overall Size Height 470mm approx, Width 280mm approx, Length 800mm approx Weight 36.5 Kg approx

The Gladstone G51E is the same model as a 49E but is fitted with a interlocked hopper safety switch , this switch together with its high torque motor makes the pug mill extremely easy to load as there is no safety grid in the hopper to impede the flow of Clay , when the loading handle is raised the machine switches off and then on again when the loading handle is lowered .

TECHNICAL DATA G51E ECONOMY PUGMILL

4" aluminium body, 2' (5Omm) extrusion Split body to facilitate easy cleaning, Individual Nylatron blades mounted on a hexagonal steel shaft, Geared motor reduction drive -- single or three phase Safety switch and overload starter, Output 190-200 Kg / 400-450 lbs per hour approx, Overall Size Height 470mm approx, Width 280mm approx, Length 800mm approx Weight 36.5 Kg approx

The Gladstone G50E is the same compact design as the G49E but has a larger 150 mm barrel with a 75mm outlet . The G50E has a greater out put and due to its larger hopper is easier to use than its smaller cousin , the pug mill is supplied as standard with a thermal overload switch .

TECHNICAL DATA G50E ECONOMY PUGMILL

6" aluminium body, 3" (75mm) extrusion, Split body to facilitate easy cleaning, Individual aluminium blades mounted on a

hexagonal steel shaft, Geared motor reduction drive - single or three phase Safety grid and overload starter, Output 30OKg per hour approx Overall Size., Height 500mm approx, Width 280mm approx, Length 800mm approx Weight 78Kg approx.

The Gladstone G52E is the larger version of the G51E and has the same easy loading hopper fitted with the unique safety interlocked switch . The G52E has a 150mm barrel with a 75 mm out let and individual Alloy blades .

TECHNICAL DATA G52E ECONOMY PUGMILL

6" aluminium body, 3" (75mm) extrusion, Split body to facilitate easy cleaning, Individual aluminium blades mounted on a hexagonal steel shaft, Geared motor reduction drive -single or three phase

Safety switch and overload starter, Output 36OKg per hour approx

Overall Size., Height 500mm approx, Width 280mm approx, Length 800mm approx Weight 78Kg approx