The G48 is a 50 mm out let de-airing pug mill this machine can be offered in range of specifications and is ideal for the small studio Or laboratory use . The standard machine incorporates Aluminium barrels and nose cone with Nylatron blades . The auger is powered by a in line helical drive motor and gearbox and the pug mill is supplied complete with a high volume vacuum pump.

Technical specification:

Construction— 4" (100 mm ) Aluminium body with a 50 mm out let split body and nose cone to facilitate easy cleaning , individual Nylatron blades mounted on a hexagonal shaft. Drive— 0.37 KW (0.5 Hp ) Geared reduction drive single or three phase Vacuum pump— Rotary vane oil immersed –28" (-1 Bar ) Capacity Dimensions—1260 mm long x 310 mm wide x 460mm high

Out put 220 Kilos per hour Weight— 65 Kilos.

Optional extras—Laboratory specification pack, Variable speed drive , dies plates, Pug stand

The G78 is supplied complete fully wired and with the vacuum pump

mounted on the machine.

Easy Clean.

Optional extras include—Variable speed drive , Stainless steel Auger tile nose cone , die plates , Pug stand Technical specification

Construction— 6" (150 mm ) Aluminium body with a 75 mm out let split body and nose cone to facilitate easy cleaning , individual Aluminium blades mounted on a hexagonal shaft.

Drive— 1.1 KW (1.5 Hp ) Geared reduction drive single or three phase Vacuum pump— Rotary vane oil immersed – 28" (-1 Bar ) Capacity .

Dimensions—1300 mm long x 310 mm wide x 510mm high.

Out put 320 Kilos per hour.

Weight— 145 Kilos.

The G54 is the largest out let machine at 100 mm it is capable of producing up to 500 kilos per hour of clay and is extremely robust in construction . The G54 uses heavy section cast Alloy barrels with anti barrelling strips , the auger consists of individual Alloy blades mounted on a hexagonal shaft, these can be altered in configuration depending on the required performance. The G54 is supplied complete with all the required switch gear and a interlocked hopper safety switch .

Construction— 8" (200 mm ) Aluminium body with a 100 mm out let

split body and nose cone to facilitate easy cleaning , individual aluminium blades mounted on a hexagonal shaft .

Drive— 2.2 KW (3 Hp ) Geared reduction drive single or three phase

Vacuum pump— Rotary vane oil immersed –28" (-1 Bar ) Capacity

Dimensions—1800 mm long x 320 mm wide x 670mm high

Out put 500 Kilos per hour

Weight— 145 Kilos

Optional extras include—Variable speed drives , Stainless steel Augers , die plates, and Pug mill stand

The G77 is a fantastic development of our successful De-airing range of Pugmills.

Gladstone pioneered the antis feed back tube in de-airing pug mills over 20 years ago and due to this very successful development we are able to offer the only production Vertical de-airing Pugmill . The G77 has all of the advantages of a standard Vertical pug mill these include the ease of use the more ergonomic loading position and the very compact design that only uses a small amount of floor space , less space than our smallest pug mill mounted on a bench . The incredible advantage of the G77 is not only that it can produce a well de-aired body that can be used straight out of the pug mill but with the fitment of optional dies it can extrude thin wall hollow extrusion with out the risk of the extrusion collapsing .