Low density, dry lined construction for ease of replacement

1300°C firing temperature for all models

Double skin casing including stainless steel inner panels

Low kilowatt input for maximum size of chamber

Lid gas springs on larger models

Two tone, stove enamelled finish casing

All electrical connections concealed behind hinged front control

     panel

Full range of kiln furniture & control equipment available

Two year warranty including elements

Dimensions and Prices

Stanton front Loading K Range

Please note: colours of the kiln will differ from image colours, panels are

     Maroon with Silver surround.

Product Description

These kilns have been developed to meet a growing demand for a good quality, efficient top-loading kiln for use at up to 1300°C, operating with a minimum heat loss and a sensible outside casing temperature.  The kilns are compact in design with detailed attention paid to both the construction and the quality of materials used.  The casing has a double skin with air-gap.  The inner skin is stainless steel to give added protection against corrosion.  The kiln is fully lined with low density brick, including the lid.  The brickwork is of dry lined construction for ease of replacement.  The lid is fitted with gas springs on models T50-T80 (optional extra for other models).

Heating elements are inserted in all four walls terminating behind the hinged front control panel.  All electrical repairs can thus be carried out from the front.   All models are available in single phase or 3-phase + neutral versions and are covered by our 2-year warranty which includes elements.

When planning the installation of a kiln attention should be given to the size of the kiln room, floor strength & ventilation requirements.  Space should be allowed to enable the kiln to be manoeuvred into position and to meet the minimum clearance distances.  The floor must be level and strong enough to support the weight of the kiln and its workload.  If sited in an enclosed space forced ventilation is recommended.

Minimum clearance distances are:-

Above:    1000mm    39"

At side:    150mm      6"

At rear:    150mm      6"